- Advertisement -
- Advertisement -
How to Construct the Unsinkable Fiberglass Boat: Bangkang Pinoy Part 3 Tiyaga ang isa sa mga puhunan sa pag gawa ng bangkang pinoy kaya pag butihin sa application ng fibermats para masiguro ang kaligtasan laban sa alon. Fiberglass Boat: Bangkang Pinoy Part 3
HOW IT WORKS BANGKANG PINOY FIBERS MATS APPLICATION
CHOPPED STRAND MAT 300
- The first thing we do is is to measure yung amount ng mats na gagamitin natin. And then carefully lay it out doon sa inyong mold, kailangan covered yung pinakabase or pinaka hull ng bangka. You have to see to it that yung pinakacorner ay siksik na siksik talaga sya ng fibermat after na layout na yung CM300 now you prepared the resin. Gumamit tayo dito ng cobalt because of the weather a we use point 2 to point 3 percents, after mixing the cobalt with the resin we mixed another yung hardener na. Once yung resin is ready all we have to do is to apply the resin using your paintbrush, since this is the first lamination enhance to be “feeling perfect” you really need to avoid having bubbles. Once you applied the resin may mga portion dyan na bubukol that when you use the roller, after matuyo ng first layer natin that’s the time we have to prepare the CSM450.
CHOPPED STRAND MATS 450
- yung pag layup natin ng 450 mat CSM450 mat is also the same with a CM300. Ibig sabihin dumoduble parin yung sa baba yung hull ng ating boat.
PIERRE EASTER VELASCO
Aquaculturist II
Bureau of Fisheries and Aquatic Resources
WOVEN ROVING 600
- so we go to the next lamination process and this time we are going to use the WR600. Preferably isang lay ipna lang ng buo and then ang layup nya ay still the same parang gel type parin domuduble parin yung sa baba. This time is going to be little tougher pag applied ng resin because itong woven roving medyo makapal na talaga. Medyo you’re going to use more resin.
CHOPPED STRAND MAT 450
- so ang last lay up natin is another CM450 so you applied the same process, pag na tuyo na sya kailangan liyahin to make it even. You clean the edges para matanggal yung mga nakalawit na di natuyo ng mga strands.
MOLD SEPARATION
- after cleaning the sides we use them mallet to separate the boat from the mold.
Mahala na maging matibay ang bangka ng mga mangingisda lalo na sa hull nito because it serve as the foundation of the boat.
How to Construct the Unsinkable Fiberglass Boat: Bangkang Pinoy Part 3
- Advertisement -
